It's the first week of November. You pull into the lot at 4:45 and it's already getting dark, but your sign is off. Then a neighbor texts you a photo of it glowing away at 6 a.m. Nothing's broken that you can see. The sign just seems to have its own schedule now.
That's almost always the timer or the photocell, not the sign. After 35 years of servicing Chicago signs, we get a wave of these calls every fall, right after the clocks change and the first storms knock the power out.
Here's how sign timers work, how to reset yours, and when it's time to have someone look at it.
Most wrong-time problems come from a timer that lost track of the time, not from anything wrong with the sign itself. The usual causes:
If the sign won't come on at all, even when you bypass or override the timer, it's a different problem. Start with our diagnostic guide for dead signs.
Sign lighting is usually controlled by one of five setups, and each fails in its own way. Find the box near your electrical panel, inside the sign cabinet, or on the wall near the sign's disconnect.
| Control type | How it works | Common problem |
|---|---|---|
| Mechanical dial timer | Motor turns a 24-hour dial; pins or trippers set on and off | Loses time in outages; needs manual changes for daylight saving and seasons |
| Digital timer | Programmable clock, often with battery backup | Loses program when the backup battery dies; some need manual daylight saving changes |
| Astronomical timer | Calculates sunset and sunrise for your location every day | Wrong location or date entered at setup; dead backup battery |
| Photocell | Light sensor turns the sign on at dusk and off at dawn | Dirt, aging, or stray light fooling the sensor |
| Photocell + timer combo | Photocell turns it on at dusk, timer turns it off at a set hour | Either part can fail; the timer still needs correct time |
The combo setup is popular for storefronts. The sign comes on at dark, whatever the season, and shuts off at closing time instead of burning all night.
You set the current time by turning the dial, then check that the on and off trippers are where you want them. This is a safe owner job as long as you stay away from the wiring:
If the dial doesn't move on its own after a few minutes, the timer motor has likely failed. That's a replacement, not a reset.
Digital timers reset from the keypad; astronomical timers also need your location and the correct date. General steps (check your model's label or manual for button names):
If you're not sure which box controls the sign, or the timer sits inside a panel with exposed wiring, stop and call. Opening an electrical panel isn't an owner job.
If the sign comes on during the day, won't come on at night, or cycles on and off at dusk, suspect the photocell. A photocell is a small light sensor, usually on top of the sign, on the building or on a nearby pole. Common photocell trouble:
Wiping a reachable lens from the ground with a dry cloth or pole is fine. Anything that means getting on a ladder near a live sign, or replacing the unit, is a job for us. We go deeper on photocells for pole lights in our parking lot lighting guide.
If you're tired of resetting the timer twice a year and after every storm, an astronomical timer or a photocell-plus-timer combo is worth it. Benefits:
For signs controlled by a photocell, adding a timer for the "off" side keeps the sign from burning all night when you don't need it. Photocell replacement typically runs $200–$350. Timer replacement is usually in a similar range, but the final price depends on the timer type, where it's mounted, and whether we need a lift to reach it.
Chicago winters are rough on outdoor controls too. Moisture inside a timer box causes corrosion and erratic switching, which our winter sign damage guide covers along with other cold-weather failures.
Call when a reset doesn't stick, the timer motor or display is dead, or the problem involves wiring. Signs it's past a reset:
That last one usually means the problem is downstream of the timer: a ballast, transformer or power supply. If you have a fluorescent lightbox, see Sign Ballast Replacement: Why Your Lighted Sign Went Dark (coming soon).
Rick Signs and Repairs has been keeping Chicago signs lit since 1989. We're a father-and-son shop in Edgewater, and timer and photocell calls are bread-and-butter work for us. We replace worn timers, install astronomical timers, relocate photocells that are getting fooled by streetlights, and check the rest of the sign while we're there.
If your sign's schedule has gone sideways, our sign lighting repair service covers timers, photocells, ballasts and bulbs for lightbox and cabinet signs.
A sign that's on at noon or off at dusk is usually a timer that lost track of time from daylight saving, an outage or a dead backup battery. Resetting a mechanical or digital timer is a safe owner job. A photocell that's dirty, aging or aimed at a streetlight is the other common culprit, and an astronomical timer fixes most of this for good.
Reset it once; if it won't stay right, call us.
Related reading
Sign keeping its own hours? Call Tymothy at (773) 815-0006 or Rick at (847) 809-7900, or request a quote.